Grandstream Networks GWN76 Series User Manual page 79

● Disable Band steering: This will disable the band steering feature and the access point will accept the band
● 2G in Priority: 2G Band will be prioritized over the 5G Band.List Item 2
● 5G in Priority: 5G Band will be prioritized over the 2G BandList Item 3
● Balance: GWN will balance between the clients connected to 2G and those connected to 5GHz.
This feature will help Wi-Fi clients to roam to other APs within the same Network.
Client Steering
Note: Once enabled, Band Steering in Access Device → Configuration → Configure cannot be configured.
SSID→Wifi Settings→802.11k will be enabled
This option is only available if Client Steering is enabled.
RSSI Threshold
Specify the RSSI Threshold before clients get steered away to another AP.
(dBm)
Note: Must be an integer between -80 and -65.
This option is only available if Client Steering is enabled.
Client Access Specify the Client Access Threshold before the AP won't accept clients and they will be steer away to another
Threshold
AP with less connected clients.
Note: Must be an integer between 10 and 100.
Airtime Fairness
Allows faster clients to have more airtime than slower clients.
Configure the beacon period， which decides the frequency the 802.11 beacon management frames AP
transmits. Please input integrates from 40 to 500.
● When AP enables 0-2 SSIDs, the interval value will be effective are the values from 40 to 500.
Beacon Interval
● When AP enables 3-8 SSIDs, the interval value will be effective are the values from 100 to 500.
● When AP enables more than 8 SSIDs, the interval value will be effective are the values from 200 to 500.
Note: mesh feature will take up a share when it is enabled.
Configure a schedule for when the Wi-Fi will be ON or Off, by default is disable or the user can enable it and
Enable Schedule
select a shedule form the drop-down list or use radio settings.
Displays the country/region of the AP.
Country/Region
Note: To configure the country/Region, Navigate to System → Settings page.
Configures whether to disable/enable 5.150–5.350GHz (channels 36-64) for outdoor usage.
Scene
Note: The "Scene" is only effective for the outdoor type of access points.
Choose the Channel Width, note that wide channel will give better speed/throughput, and narrow channel will
Channel Width have less interference. 20Mhz is suggested in very high-density environment. Default is "Use Radio Settings",
the AP then will use the value configured under Radio page.
40MHz Channel Configure the 40MHz channel location when using 20MHz/40MHz in Channel Width, users can set it to be
Location Secondary below Primary, Primary below Secondary or Auto
Select Use Radio Settings, or a specified channel, default is Auto. Note that the proposed channels depend on
Channel Country Settings under System Settings → Maintenance. Default is "Use Radio Settings", the AP then will use
the value configured under Radio page.
Set the Radio Power depending on desired cell size to be broadcasted, five options are available: "Low",
Radio Power "Medium", "High", "custom" and "Use Radio Settings".
The default is "Use Radio Settings", the AP then will use the value configured under the Radio page
Enable Short Guard
Check to activate this option to increase throughput.
Interval
chosen by the client.
2.4G/5G (802.11b/g/n/ax)