Grandstream Networks GWN76 Series User Manual page 62
Wi-fi access point
Hide thumbs
Also See for GWN76 Series:
- User manual (131 pages) ,
- Master/slave architecture manual (15 pages) ,
- User manual (117 pages)
Table of Contents
Advertisement
SSIDs
When using GWN76XX as Master Access Point, users can create different SSIDs and assign GWN76XX Slave Access Points to
them.
Log in as Master to the GWN76XX Web GUI and go to SSIDs.
All GWN76XX can support up to 32 SSIDs while the GWN7605/GWN7605LR models can support up to 16 SSIDs, and
GWN7602 can support up to 8 SSIDs, click on
When editing or adding a new SSID, users will have two tabs to configure:
Wi-Fi: Please refer to the below table for Wi-Fi tab options
Field
Description
SSID
Set or modify the SSID name.
Enable SSID
Check to enable Wi-Fi for the SSID.
Set to NAT mode, clients will get the IP addresses from the specified NAT pool. And clients
Client IP Assignment
connecting to different APs are isolated from each other. This feature is not supported in
GWN7610.
SSID Band
Select the Wi-Fi band the GWN will use, three options are available: Dual-Band 2.4GHz 5Ghz
Reset Access Point
SSIDs
to add a new SSID.
Add a new SSID
Advertisement
Table of Contents
