Dhcp Clients List - 3Com OfficeConnect 3CRWE554G72 User Manual

1 Select Unit Configuration and then specify the Gateway IP Address and
2 If you want to use the Gateway as a DHCP Server, click in the Enable
3 Clicking Auto Range will automatically choose the largest available range
4 Check all of your settings, and then click Apply.

DHCP Clients List

The LAN Settings screen is used to specify the LAN IP address of your
Gateway, and to configure the DHCP server.
Subnet Mask in the LAN Settings field. The default IP address of the
Gateway is 192.168.1.1.
check box.
of addresses for your network.
The DHCP server will give out addresses to both wired and wireless
clients.
Figure 31 DHCP Clients List Screen
The DHCP Clients List provides details on the devices that have received IP
addresses from the Gateway. The list is only created when the Gateway is
set up as a DHCP server. For each device that is connected to the LAN the
following information is displayed:
IP address — The Internet Protocol (IP) address issued to the client
machine.
Host Name — The client machine's host name, if configured.
MAC Address — The Media Access Control (MAC) address of the
LAN Settings 45