Replacement Power Adapters - 3Com OfficeConnect 3CRWE554G72 User Manual

Wireless 11g cable/dsl gateway
Table of Contents

Advertisement

Power LED or
Power Adapter OK
LED Not Lit
Replacement Power
Adapters
correspond to the Gateway channel number. Please refer to your
Wireless computer adapter documentation and vendor to do this.
Speed of connection: The 802.11b and 802.11g standards will
automatically choose the best speed depending on the quality of your
connection. As the signal quality weakens then the speed falls back to
a lower speed. The speeds supported by 802.11g are 54 Mbps,
48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, and 6 Mbps. The
speeds supported by 802.11b are 11 Mbps, 5.5 Mbps, 2 Mbps and
1 Mbps. In general the closer you are to the Gateway the better the
speed. If you are not achieving the speed you had anticipated then try
moving the antenna on the Gateway or moving the Wireless
computer closer to the Gateway. In an ideal network the Gateway
should be located in the centre of the network with Wireless
computers distributed around it. Applications are generally available
with the computer wireless card to carry out a site survey. Use this
application to find the optimal siting for your wireless computer.
Consult your Computer Card documentation and vendor for more
details.
Check that your Gateway is receiving power by looking at the status
of the Power LED on the front panel and the Power Adapter OK LED
on the rear panel:
If both LEDs are lit green then the unit is receiving power.
If both LEDs are unlit then no power is being supplied to the unit.
Check that the power adapter is plugged into a working mains
outlet and that the mains outlet is supplying power. If the mains
socket is supplying power then the power adapter or power
adapter connection may be faulty. See
Adapters"
below.
If the Power Adapter OK LED is lit but the Power LED is unlit then
there may be a fault with your unit. Contact 3Com Technical
Support.
Check that you are using the correct power adapter for your Gateway.
You should only use the power adapter supplied with your Gateway.
If both the Power Adapter OK LED and Power LED are off, check your
power adapter connection. If the mains outlet is working and is capable
of supplying power to other devices, contact 3Com Technical Support
and ask for a replacement power adapter. Please quote the power
Power LED or Power Adapter OK LED Not Lit
"Replacement Power
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents