Lcd Sensor Switch Assembly - Toshiba PORTEGE R300 Maintenance Manual

4 Replacement Procedures

4.11 LCD sensor switch assembly

Removing the LCD sensor switch assembly
To remove the LCD sensor switch assembly, follow the steps below and refer to Figure 4-16.
1. Remove following screws.
• M2×3B
S-THIN HEAD screw
2. Remove the LCD sensor switch assembly from entering the computer.
Figure 4-16 Removing the LCD sensor switch assembly
Installing the LCD sensor switch assembly
To install the LCD sensor switch assembly, follow the steps below and refer to Figure 4-16.
1. Place the LCD sensor switch assembly on the Cover FAT assembly.
2. Secure the LCD sensor switch assembly with the following screws.
• M2×3B
S-THIN HEAD screw
4-24 [CONFIDENTIAL]
All manuals and user guides at all-guides.com
PORTÉGÉ R300 Maintenance Manual (960-591)
4.11 LCD sensor switch assembly
×1
M2×3B S-THIN HEAD
LCD sensor switch assembly
×1