Toshiba PORTEGE R300 Maintenance Manual page 259

4.12 LCD unit
LCD unit
Harness holder
M2.5×5BS FLAT HEAD
Hinge (L)
Hinges cover (L)
Installing the LCD unit
Install the LCD unit, follow the steps below and refer to Figure 4-18.
1. Set the hinge cover (L/R) to the LCD unit and secure it with the following screws.
• M2×4C
2. Install the LCD unit to the base assembly and secure it with the following screws.
• M2.5×5BS
3. Install the harness holder.
Removing the LCD panel
To remove the LCD panel, follow the steps below and refer to Figure 4-19.
1. Remove the mask rubbers (2 points) and following screws securing the LCD mask.
• M2×4C
PORTÉGÉ R300 Maintenance Manual (960-591)
All manuals and user guides at all-guides.com
Hinge (R)
M2×4C S-THIN HEAD
Figure 4-18 Removing the LCD unit
S-THIN HEAD screw
FLAT HEAD screw
S-THIN HEAD screw
4 Replacement Procedures
M2.5×5BS FLAT HEAD
M2×4C S-THIN HEAD
Hinges cover (R)
×2
×2
×2
[CONFIDENTIAL] 4-27