Epson WF-2750DWF User Manual page 69

User's Guide
Note:
❏ Distinctive ring services, offered by many telephone companies (the service name differs by company), allows you to
have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one
number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in DRD.
❏ Depending on the region, On and Off are displayed as the DRD options. Select On to use the distinctive ring feature.
7. Select whether you are using your phone device connected to the printer.
❏ When connected: Press the
❏ When not connected: Press the
8. Select whether you want to receive faxes automatically.
❏ To receive automatically: Press the
❏ To receive manually: Press the
9. On the Confirm Settings screen, press the OK button. Press the
made, and then press the OK button.
To correct or change settings, press the
10. Select Start, and when you are prompted to print the check result, press the
A report of the check result that shows the connection status is printed.
Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If you are prompted to select the line type, select the line type. When you are connecting the printer to a PBX phone
system or terminal adapter, select PBX.
❏ If the screen indicates that the dial tone is not detected, press the
However, disabling the dial tone detection feature may cause the printer to skip the first digit of a fax number when
dialing and send the fax to the wrong number.
11. When Start is displayed again, press the
Related Information
"Connecting the Printer to a Phone Line" on page 65
&
"Setting Receiving Mode" on page 74
&
"Making Settings for a PBX Phone System" on page 70
&
"Fax Settings" on page 22
&
Making Basic Fax Settings Individually
You can make fax settings without using the fax setting wizard by selecting each setting menu individually. The
settings configured using the wizard can also be changed. For more details, see the list of menus in fax settings.
Related Information
"Fax Settings" on page 22
&
Faxing
u
button, and then go to the next step.
d
button, and then go to step 9. Receive Mode is set to Auto.
u
button. Receive Mode is set to Auto.
d
button. Receive Mode is set to Manual.
y
button.
d
button. Select Done to quit the wizard.
69
u d
and buttons to check the settings you
x
button.
u
button to disable the dial tone detection feature.