Using The Headset Feature; Redial Feature; Caller Id System Operation; Placing Calls From The Phone Book - Cortelco 730901-TP2-27F Installation And Operating Instructions Manual

Caller ID System Operation

Placing Calls from the PHONE BOOK

1. Press the button.
DIR DIR
2. Press the SCROLL UP or DOWN
3. Press the
/ VOICE MAIL button to change the format of the displayed number.
Available formats Include:
Explanation
Number of digits
Long distance code "1"
Eleven digits +3 - digit area cod
+7 - digit telephone number.
3-digit area code+
Ten digits
7-digit telephone number.
Seven digits 7-digit telephone number.
4. Press the TALK button to dial the number displayed in the screen.
5. To end your conversation, either press the
on the BASEUNIT.
NOTE: If the phone company does not supply all ten digits of an incoming caller, you
will not be allowed to adjust the format of that number.
button to find the record you want to call.
Example
1-234-567-8901
234-567-8901
567-5901
TALK button or place the HANDSET
17
Cordless Telephone Operation

Using the Headset Feature

Your telephone can utilize a headset (not
included) to be connected to your HANDSET
for you to enjoy hands-free communication.
Insert the small plug at the end of the headset
into the HEADSET JACK at the right side of
the HANDSET. Follow the procedures
discussed in "Receiving Calls "and" Placing
Calls" to receive and place a call.
NOTE: When you plug the headset plug into
the HEADSET JACK it automatically
mutes the MICROPHONE
SPEAKER of the HANDSET. Unplug
the headset to return the HANDSET
to normal use.

Redial Feature

1. If you get a busy tone, press the TALK
or place the HANDSET on the BASE UNIT to
hang up.
2. Later, press the button again.
TALK
3. Listen for a dial tone.
4. Press the RE/PA button, this will automatically
SAVE
redial the last telephone number you called.
5. When you have finished with your call, press
the TALK button again or place the
HANDSET on the BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits "beep"sounds to warn
you that the Background noise level is too high for proper communication between the
HANDSET and the BASE UNIT. When you hear this sound, you should move closer to
the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off.
HEADSET
MICROPHONE
SPEAKER
HEADSET
PLUG(2.5mm)
and
HEADSET JACK
button
TALK
DIR SAVE
EDIT RE/PA
FLASH
10