Pause Button; Hold Button; Flash Button; Headset Button - Cortelco 2700 Owner's Instruction Manual

3. The selected number (32 digits maximum) will be redialed.

PAUSE BUTTON

PAUSE allows you to insert a 3.6-second pause in the dialing se-
quence. This is particularly useful if you are connected to a PABX
system where you must dial an access code (usually the number 9) to
obtain an outside line.
1. Press PAUSE and release at any point in the dialing sequence
where a pause is desired.
2. PAUSE can be pressed more than once to create a longer pause.

HOLD BUTTON

1. NORMAL MODE
a. Press HOLD and hang up the handset. HOLD will light up and remain
lighted until you resume your conversation.
b. To resume your conversation, lift the handset or that of any extension
phone on the same line or press and release SPEAKER. The HOLD
indicator will go out and your call can continue.
2. PBX MODE
Press HOLD. The phone will dial out the code. Depending on the
PBX, it may now be necessary to hang up the handset. Note that
HOLD will not light in this mode.

FLASH BUTTON

This telephone provides a line break signal for accessing PABX service
or for use of Call Waiting from your local telephone company. If you
have Call Waiting service, you can use the Call Waiting function per
the following instructions.
1. While having a conversation, another party calls and you hear a
tone.
2. Press FLASH once and release. The first conversation is placed on
hold and the second call can be answered.
3. Press FLASH again and release. You may speak to the first caller
again and the second call is placed on hold.

HEADSET BUTTON

This telephone will accept either a 2.5 mm cell phone-style headset or
an RJ type headset. Use HEADSET to connect and disconnect from
calls.

DATA PORT

This is a connection which is in parallel with the telephone line. It
allows the connection of a device such as a modem, caller ID, or an
answering machine. This connection is located on the bottom of the
phone and is marked DATA.
14