Storage Fault Recovery Tracking; Network Interface Fault Recovery Tracking; Memory Fault Recovery Tracking; Automatic Server Recovery-2 - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-10 Server Management

Storage Fault Recovery Tracking

With the purchase of a Fast-SCSI-2 option controller, this feature will track
over 12 failure indication parameters, such as time-outs, spin-up, and self-test
errors of SCSI drives. You can use these parameters to pinpoint failed storage
subsystem components and to recover from controller or hard drive failure.
Network Interface
Fault Recovery Tracking
This feature tracks over 20 failure indication parameters, such as alignment
errors, lost frames, and frame copy errors, of Ethernet and Token Ring
network interfaces. It decreases network downtime by enabling diagnosis of
actual network interface failures.

Memory Fault Recovery Tracking

This feature inspects the operation of the memory subsystem looking for
uncorrectable memory errors (with the option upgrade kit).

Automatic Server Recovery-2

Automatic Server Recovery-2 (ASR-2) lets the server restart automatically
from the operating system or the Compaq Utilities. To use this feature, you
must use the System Configuration Utility to install Compaq Utilities in the
system partition.
You can tell ASR-2 to restart your server after a critical hardware or software
error occurs. Using the Compaq System Configuration Utility, configure the
system for either automatic recovery or for attended local or remote access to
diagnostic and configuration tools.
Writer: Compaq Computer Corporation Project: Server Management Comments:
File Name: D-ch2.doc Last Saved On: 4/14/97 11:14 AM