Diagnostic Error Codes - Compaq ProSignia 200 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-22 Diagnostics Tools
Accessing the utilities from the system partition:
1. Reboot the server by pressing the Ctrl+Alt+Delete keys.
2. Press F10 when the following prompt appears at the top of the screen
during POST.
Press "F10" for System Partition Utilities
IMPORTANT:
during this time, you must reboot the server.
3. From the System Configuration Main Menu, select Diagnostics
and Utilities.
If there are errors detected in the Server Health Log, the Diagnostics
Utility automatically displays the following screen message:
CAUTION: Errors have been detected in your Server Health Log. Diags will now
identify your system hardware.
4. Press the Enter key to continue.
5. After a short pause, the Server Health Log menu displays with a list of
system errors. If there is more than one error, press the Space Bar to
select the error you want to correct. Then press Enter.
6. The Diagnostics Utility prompts you and suggests corrective action.

Diagnostic Error Codes

The Diagnostic error codes and recommended actions are listed in the
following tables.
Writer: Compaq Computer Corporation Project: Diagnostics Tools Comments:
The text appears for only two seconds. If you do not press F10
File Name: J-ch8.doc Last Saved On: 4/14/97 12:05 PM