Toshiba RAS-25S4KVPG-ND Service Manual page 52

Item
28. Smart sensing
<Direct air and Indirect air operation>
This function is detect heat sources or humans position
and automatically adjusts air direction according to user
needs.
The thermal sensor scanning angle is 140°.
Zone detection of thermal sensors.
Out of scanning zone
• Direct air operation
1) Horizontal louver is maximum air flow volume position and
vertical louver is center position.
2) Thermal sensor is received human sources position every
1 minute.
3) Louver position is automatically move corresponding for
each human sources position.
• Indirect air operation
1) Horizontal louver is minimum angle in cooling operation
and heating standard angle in heating operation.
Vertical louver is wide spot for both operation.
2) Thermal sensor is received human sources position every
1 minute.
3) Louver position is automatically moved to avoid each
human sources position.
Horizontal louver position
Operation flow and applicable data, etc.
FCU
20°
20°
140°
4 meter.
Minimum angle
Maximum air flow volume
Heating standard angle
In AUTO, Cooling or Heating mode are
available.
1) Press "MENU" button.
2) Press "TEMP" up or down to select
3) Press "MENU" on
4) Press "TEMP" up or down to find
Out of scanning zone
- 52 -
Description
feature.
symbol.
"Direct air"
"Indirect air"
and press "MENU" to selected.