Display Lamp Brightness Adjustment; Operation Mode Select Table - Toshiba RAS-25S4KVPG-ND Service Manual

Item
24. Display lamp To decrease the display lamp brightness or turn it off.
brightness
1. Press and hold
adjustment
2. Press
Remote control
● In the examples of
Operating system setting
25. Operation
mode
select table
• Do cut J804 for cooling only system
• Do cut J805 for heating only system
• Do cut both of J804 and J805 for return
to factory default.
Operation flow and applicable data, etc.
or ) is shown on remote control LCD then release the button.
or
Rise
Decrease
LCD
Lamp illuminates full brightness.
Lamp illuminates 50% brightness.
Lamp illuminates 50% brightness and the operation lamp
is turned off.
All lamps are turned off.
and
going off.
for 3 seconds until brightness level (
to adjust brightness in 4 levels.
Operation display
, the lamp illuminates for 5 seconds before
1. Purpose
Choosing the operating system as
appropriate in real condition
2. Operation
Factory default setting prefer
"Heat pump" system. Through it is
able to cooling only system
heating only system or return to
factory default.
- 49 -
Description
, ,
Brightness
100%
50%
50%
All turned off