Jensen JCR311 Installation & Owner's Manual page 6

OPERATION
General Operation - Setup Menu
Press and hold the volume knob for more than 3 seconds to access the setup menu.
Press the volume knob momentarily to select between the menu functions and rotate
the volume knob left/right to adjust or activate the desired function.
Menu Function
Auto Station
Store
Local/Distance
Tuning
Tuner
Frequency
Spacing
Auxiliary Input
Beep
Confirmation
Programmable
Turn On
Volume
Power On
Message
Scrolling
Option
Bluetooth
Auto Answer
6
6
Options
When you see Auto Store, press DISP to seek and save 6
AUTO STORE
strong stations in the current band. (Tuner mode only)
LOCAL OFF Activates distance tuning (Tuner mode only).
Activates local tuning for strong station reception only
LOCAL ON
(Tuner mode only).
Programs the unit to USA tuner spacing.
FREQ USA
(200kHz for FM and 10kHz for AM). (Tuner mode only)
Programs the unit to European tuner spacing.
FREQ EURO
(50kHz for FM and 9kHz for AM). (Tuner mode only)
Enables the front panel 3.5mm auxiliary input.
AUX ON
AUX OFF Disables the front panel 3.5mm auxiliary input.
BEEP OFF Disables the confirmation beep.
BEEP ON Enables the confirmation beep.
Programs unit to always turn on at a specific volume
PRO OFF/
(default is OFF). Any volume level 1-30 can be selected.
VOL#
MSG OFF Disables power on message. (Example: GOOD MORNING)
MSG ON Enables power on message to be displayed.
SCROLL 15 Programs unit to scroll information every 15 seconds
SP (default).
SCROLL Programs unit to scroll once then show the first 10
ONCE characters on display
SCROLL ON Programs unit to scroll continuously.
Programs the unit to show the first 10 characters on
SCROLL OFF
display.
DEMO OFF Disables the demonstration mode.
DEMO ON Enables the demonstration mode.
BT ON Enables Bluetooth functionality.
BT OFF Disables Bluetooth functionality.
ANSWER Programs unit to automatically answer every incoming
Auto phone call after 2-3 rings.
ANSWER
Programs unit to require the
Manual
to answer incoming phone calls (default).
Action
button must be pressed