Warranty Reference Information; Design Data - Cornelius UC 700 Series Installation & Service Manual

UC 700 Series Continus-Flow Icemaker Installation/Service Manual
W R
ARRANTY EFERENCE
Unit Part Number:
Serial Number
Install Date:
Local Authorised
Service Center:
D D
ESIGN ATA
Unit Model Number:
UC700–A Series Continuous–Flow Icemaker (Air–Cooled)
UC700–W Series Continuous–Flow Icemaker (Water–Cooled)
Unit Overall Dimensions:
Height
Width
Depth
Clearances Dimensions Required:
Front Side Service Access (Removable front panel to allow removal of Unit)
Side Opposite Storage Bin for Air Exaust
Rear for Air Exaust
Weights:
Shipping Weight
Water Supply–Water inlet fitting is 1/4–inch SAE flare located at the top front of the Unit. The Unit is designed to operate on
water pressure between 10 PSI and 90 PSI.
Drain Overflow Line (Located at rear of the Unit) 3/8–inch Flexible Tubing
Ambient Operating Temperature
Electrical:
Unit Electrical Rating
Recommended Electrical Supply
Publication Number: 630460127
I
NFORMATION
Warranty Registration Date
(to be filled out by customer)
Table 1. Design Data
- 4 -
27 inches
13.7 inches
25.5 inches
25 inches
184 pounds
40° F to 100° F
115 VAC, 60 Hz, 15.6 Amps, Single
115 VAC, 60 hz, 20 Amps Dedicated
3–Wire Grounded Circuit
© 2000-2011, IMI Cornelius Inc.
4 inches
4 inches
Phase