Removing The Display Assembly; Prerequisites; Procedure - Dell Alienware 17 R3 Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Follow the procedure from step 1 to step 9 in "Removing the

Procedure

1
Close the display and turn the computer over.
2 Remove the screws that secure the display assembly to the computer
base.
3 Remove the screw that secures the wireless-card bracket and the wireless
card to the system board.
4 Lift the wireless-card bracket off the wireless card.
52
Before working inside your
base panel.
computer. For more safety best
computer.
palm rest".