Replacing the camera
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in
After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1
Using the alignment posts, adhere the camera module to the display back-
cover and snap it into place.
2
Connect the camera cable to the camera module.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Follow the procedure from step 5 to step 11 in "Replacing the
4
Replace the
wireless
5
Replace the
base
Before working inside your
bezel.
assembly.
card.
panel.
computer. For more safety best
computer.
palm
rest".
123