Table of Contents
Advertisement
Replacing the I/O board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in
After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Align the ports on the I/O board with the slots on the computer base.
2
Align the screw holes on the I/O board with the screw holes on the
computer base.
3
Replace the screws that secure the I/O board to the computer base.
4
Connect the I/O-board cable to the I/O board.
5
Connect the subwoofer cable to the I/O board.
Post-requisites
1
Follow the procedure from step 5 to step 11 in "Replacing the
2
Replace the
base
64
Before working inside your
panel.
computer. For more safety best
computer.
palm
rest".
Advertisement
Table of Contents
