Remcor SID650A/80 Operator's Manual page 31

YES
DOES
AGITATOR
ROTATE?
NO
1. CHECK MOTOR CAPACITOR.
2. CHECK TIMER SWITCH #5.
3. CHECK AGITATOR MOTOR.
IS
HOPPER LEVEL
TOO HIGH?
1. CHECK BIN THERMOSTAT
ADJUSTMENT.
2. REPLACE BIN THERMOSTAT.
91704
3. DISPENSER PROBLEM
YES
GATE OPEN?
NO
YES
YES
IS
ICE SLUSHY?
NO
DONE
DOES NO
1. CHECK FOR BURNED OUT SOLENOID.
2. CHECK FOR STUCK OR BINDING GATE
MECHANISM.
1. CHECK FOR BLOWN SOLENOID FUSE IN ELEC-
TRICAL BOX. IF FUSE IS BLOWN, CHECK FOR
STUCK GATE MECHANISM, BURNED OUT SOLE-
NOID, OR LOW VOLTAGE.
2. CHECK VEND SWITCH.
3. CHECK FOR LOOSE OR BROKEN WIRE CONNEC-
TION IN SOLENOID CIRCUIT.
4. CHECK VOLTAGE PROBLEMS IN 1.
1. CHECK HOPPER DRAINS.
2. CHECK LEVEL OF UNIT.
3. CHECK FOR WATER OVERFLOW FROM EVAP-
ORATOR. SEE SECTION 2.
4. CHECK ADJUSTMENT OF TIMER CAM #5.
(AGITATION)
5. CHECK TIMER SWITCH #5.
28
IS
YES
VOLTAGE AT
SOLENOID
103-126V.?
NO