Siemens SITRANS F M MAG 3100 sensor Operating Instructions Manual page 38

Connecting
5.2 Remote installation
2. Remove SENSORPROM
3. Fit the ½" NPT or M20 cable glands for supply and output cables.
4. Fit and connect electrode and coil cables as shown below.
36
transmitter, see relevant transmitter operating instructions.
A Sensor
B Electrode cable
C Coil cable
D Only required for ATEX applications
unit from sensor and mount it on connection plate in
®
SITRANS F M MAG 3100 sensor
Operating Instructions, 09/2012, A5E03005599-02