Height Adjustment Of Telescopic Bracket; Operation; Before Starting Work - Stiga SWP 355 Operator's Manual

SWP 355
6.3 Height adjustment of telescopic bracket
The telescopic sliding bracket (1) can be adjusted
to the height of the user in three levels.
Fig. 9: Height adjustment of telescopic
bracket
1. Press the locking springs (2) inwards on both
sides of the telescopic sliding bracket.
2. Adjust the telescopic sliding brackets
according to your height.
» The locking springs (2) must lock into the
desired position audibly and visibly.

7. Operation

Risk of cutting due to broken glass, metal or
other sharp edged materials!
When emptying the sweeping container,
cutting injuries may occur due to broken glass,
metal or other sharp edged materials.
• Wear the prescribed personal protective
Health impairments caused by dust
resulting from sweeping!
The inhalation of dusts can endanger the
1
health.
2 • Wear the prescribed personal protective
7.1 Before starting work
• Check the device to make sure that it is functioning

before starting work.

• Check the telescopic sliding bracket to make sure
that it is firmly fixed in the handles.
• Check the sweeping container to make sure it is
firmly fixed and in good condition.
• Check the plate brooms and the fine dust sweeping
roller for rolled up threads and cords. Remove these
if necessary.
• Check the plate brooms and the fine dust sweeping
roller for jammed items or contamination.
• Check the handle for contamination and clean its if
necessary.
Height adjustment of the plate brooms
The heights of the brooms is adjusted in the middle
of the front part. The height adjustment sets the plate
brooms to the surface to be swept. The levels are
based on empirical values and must therefore be con-
sidered as the levels are based on empirical values
and must therefore be regarded as reference values.
As a result, during sweeping, adaptations of the levels
may need to be made depending on the surface.
• Level 1: for all level, hard surfaces
(e.g. asphalt, concrete, slabs...)
• Level 2: for damp leaves, sand, and uneven
surfaces (e.g. washed concrete slabs)
• Level 3: for heavy soiling and severely uneven
surfaces
WARNING
equipment!
CAUTION
equipment!
Commissioning
Operation
63
EN