Sony DSR-11 Operating Instructions Manual page 35

Connecting to another VCR
The video and audio signals are sent from another VCR with virtually no
deterioration in quality, enabling high-quality recording. The signal flow is
automatically detected so you do not need to make separate connections for
input and output.
Player
Other VCR
to the
to the
DV jack LANC jack
LANC cable (not supplied)
i.LINK cable (DV cable) (not supplied)
Notes
• With the DV connection, the sound is recorded in the same audio
recording mode as that of the source tape. To record in a different audio
recording mode from the source tape, use the analog connection instead.
• With the DV connection, data codes (recording date/time, camera data)
recorded on the source tape are transmitted from the other VCR (player).
As a result, when you play back a recorded tape on this unit and press the
DATA CODE button on the Remote Commander, the same data codes
recorded on the source tape are displayed on the monitor screen.
However, the contents of the cassette memory are not transmitted.
• If no picture appears via the DV jack, disconnect, then reconnect the
i.LINK cable (DV cable).
• As for the LANC connection, see "Notes for the LANC connection" on
the next page.
Recorder
Monitor
Chapter 2 Playback and Recording
DSR-11
l: Signal flow
35
(GB)