Miele PDR 908 HP EL Operating And Installation Instructions page 87

Heat-pump dryer
Table of Contents

Advertisement

Drain hose for condensed
water
The condensed water is pumped away
through the drain hose which is
located at the back of the dryer.
Laying the drain hose
Damage to the drain hose due to
incorrect handling.
The drain hose can suffer damage
and leak.
Do not pull on the drain hose and do
not stretch it or allow it to become
kinked.
Tip: Use the bow-shaped guide to
prevent the drain hose from becoming
kinked.
Drain-hose length: 5 1/8" (1400 mm)
Drain height: 39 3/8" (1000 mm)
 Pull the drain hose out of the clips.
Installation and connection
Inserting the drain hose into a
standpipe
 Insert the end of the drain hose into
the standpipe.
Risk of damage from leaking
water.
Should the end of the hose come
loose, overflowing water can cause
damage.
Secure the drain hose carefully (e.g.,
by tying it) to make sure it cannot
slip.
87

Advertisement

Table of Contents
loading

Table of Contents