Parts; Exhaust Hoses; Window Kit; Mounting The Exhaust Hoses - Soleus Air PH4-13R-01 Operating Instructions Manual

PARTS & ASSEMBLY
PARTS
EXHAUST HOSES
~,\Ml)L-
E)(haust Hose
Hose
1?;~L..~:)~:"'-
__
Window Kit
Adaptor
WINDOW KIT
,
ASSEMBLY & INSTALLATION
INSTALLATION
When the unit is operating as an air conditioner, heater, or dehumidifier, the unit draws in fresh outdoor air and exhausts
hot air (in AC or dehumidifier mode) or cool air (in Heat mode) out orthe room to complete the air exchange. When the
unit is operating in fan mode, no outdoor air exchange takes place. The window kit and exhaust hose do not need to
be
installed when the un it is used as a fan.
NOT E: T he supplied w indow kit can be insta lled in sliding w indows a nd sliding glass doors up to 8 ft. lon g
(approx im ate length).
MOUNTING THE EXHAUST HOSES
• Choose a suitable location, near a grounded electrical outlct and su itable window or door. Remove
packaging and locate components.
• Extend both ends of the exhaust hoses approximately 6 inches.
• Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw Ihe hose adapter onlo
the o ther end of the exhaust hose clockwise. Repeat o n the o lher exhaus t hosc.
• Remove outlet covers from the back of the unit by screwing them counter-clockwise, then lifting up.
• Mount the exhaust hoses onto the back of the unit
by
lock ing the hose adapters into place.
5