Compressor Indicator; Auto/Sleep Mode - Soleus Air PH4-13R-01 Operating Instructions Manual

Auto Mode
I) Install the exhaust hoses and window kit properly (see pages
6, 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
<-
4) Press the MODE button until the"
\! "
icon appears on the control panel display. Select the fan speed
by pressing the FAN SPEED button.
NOTE: During AUTO mode, the unit operates in Heating mode when the room temperature is below 68 of,
Dehumidifier mode when the room temperature is between 68
of
to 80
of.
And Air Conditioner mode when
the room temperature is above 80 of.
Sleep Mode (This mode can only be selected when using the Remote control)
I) To set Sleep mode, make sure the unit is in Air Conditioner mode or Heating mode.
2) Press the SLEEP Button on the remote control. The " :) " icon appears on the control panel display.
3) When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.
4) When in Air Conditioner mode, the temperature setting will gradually increase to 2 of above the original set
temperature for 6 hours. After 6 hours the temperature setting wi ll return to the set temperature.
,
5) When in Heating mode, the temperature setting wi ll gradually decrease to 2 F below the original set tem-
perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.
6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
Compressor Indicator
The" OQ " icon will light up on the control panel display when the compressor turns on . The ;,
cD "
icon will
turn off when the compressor shuts off.
12