Setting Up The Phone; Wall Mounting - Snom 370 Quick Installation

[ S N O M 3 7 0 Q u I C k I N S T A l l A T I O N V 1 . 0 ]

Setting up the Phone

1
Your snom 370 is delivered with the footstand attached to the
phone's bottom shell (shaded gray in Fig. 1). Place the snom 370
on an even, horizontal surface that gives the rubber pads a secure
grip. Do not place it on carpets or other materials containing fibers
that could block the air vents and cause overheating.
After connecting the phone (see chapter Connecting the Phone,
below), clip the cords into the appropriate slots on the footstand or,
in the case of the handset cord, on the bottom shell of the phone
(Fig. 2).
Fig. 1

Wall Mounting

It is also possible to mount the snom 370 on the wall. In order to
do this, you detach the footstand from the bottom shell and attach
it in the appropriate position for wall mounting, as described in
steps 1 through 6, below.
CAUTION: Do not mount the additional keypad available for
the snom 370 on the wall. If you wish to use the additional
6 • Installation
Fig. 2