Replacing The Internal Speaker Holder - Lenovo 10M2 User Manual And Hardware Maintenance Manual

Replacing the internal speaker holder

Attention
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Remove the computer cover. For details, see
3
Record the routing and connection of the internal speaker cable, and then disconnect the cable from
the system board.
4
Remove the internal speaker. For details, see
5
Replace the internal speaker holder.
1
6
Connect the cable of the internal speaker to the internal speaker connector on the system board.
7
Reinstall the removed parts and computer cover, and then reconnect the cables. For details,
see
Completing the parts replacement.
Replacing field-replaceable units (FRUs)
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Removing the computer cover.
Replacing the internal speaker.
2
43