Replacing The Internal Speaker Holder - Lenovo ThinkCentre M700 Hardware Maintenance Manual

6. Secure the cable of the new internal speaker in the retaining clip on the side of the internal speaker
holder as shown.
Figure 45. Securing the internal speaker cable
7. Connect the cable of the new internal speaker to the internal speaker connector on the system board.
See "Parts on the system board" on page 34.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 133.

Replacing the internal speaker holder

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the internal speaker holder, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Remove the computer cover. See "Removing the computer cover" on page 108.
3. Remove the internal speaker. See "Replacing the internal speaker" on page 112.
114
ThinkCentre M700 and M900 Hardware Maintenance Manual