Replacing The Microprocessor - Lenovo 10M2 User Manual And Hardware Maintenance Manual

Replacing the microprocessor

Attention
Caution
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Remove the computer cover. For details, see
3
Remove the system fan. For details, see
4
Remove the internal speaker. For details, see
5
Remove the internal speaker holder. For details, see
6
Remove the heat sink. For details, see
7
Disconnect all cables connected to the system board.
Replacing field-replaceable units (FRUs)
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
The heat sink and microprocessor might be very hot. Before you open the computer
cover, turn off the computer and wait several minutes until the computer is cool.
Replacing the system fan.
Replacing the heat sink.
Removing the computer cover.
Replacing the internal speaker.
Replacing the internal speaker holder.
45