Removing And Installing A Processor - Clevo W253ESQ Service Manual

Removing and Installing a Processor

Processor Removal Procedure
1. Turn off the computer, turn it over, and remove the battery
2. The CPU heat sink will be visible at point
3. Loosen the CPU heat sink screws in the order
label Figure 7a).
4. Grip the heat sink tab and carefully lift the heat sink
a.
b.
(page 2 -
(Figure 7a).
A
, , , ,
6 5 4 3
up and off the computer
7
6 5
A
1
4
2
3
7
5) and the component bay cover
& (the reverse order as indicated on the
2
1
(Figure 7b).
Removing and Installing a Processor 2 - 11
Disassembly
Figure 7
Processor Removal
(page 2 - 8).
a. The CPU heat sink will
be visible at point
Remove the screws from
the CPU heatsink.
b. Grip the heat sink tab
and carefully lift the heat
sink up and off the com-
puter.

7. Heat Sink
• 6 Screws
A .