Removing And Installing A Processor - Clevo W270EUQ Series Service Manual

Removing and Installing a Processor

Processor Removal Procedure
1. Turn off the computer, turn it over, and remove the battery
2. The CPU heat sink will be visible at point
3. Loosen the CPU heat sink screws in the order
4. Grip the heat sink tab and carefully lift the heat sink
b.
60?
4
(page 2 - 5) and the component bay cover
.
A
, & (the reverse order as indicated on the label
2
3 1
up (Figure 7b) and off the computer at a 60 degree angle.
4
a.
3
A
1
2
Processor Removal
a. Remove the screws from
(page 2 - 9).
b. Grip the heat sink tab
Figure 7a).
4
Removing and Installing a Processor 2 - 11
Disassembly
Figure 7
the CPU heatsink.
and carefully lift the heat
sink up and off the com-
puter at a 60 degree an-
gle.

4. Heat Sink
• 3 Screws