Removing And Installing A Processor - Clevo P670SE Service Manual

Removing and Installing a Processor

Processor Removal Procedure
1. Turn off the computer, turn it over, remove the battery
2. The CPU heat sink will be visible at point
3. Loosen the CPU heat sink screws in the order
the label (Figure 9b).
4. Carefully (it may be hot) remove the heat sink unit
a.
b.
1 3
6 7
4 2
8 5
(page 2 - 6) and the component bay cover
(Figure 9a).
A
, , , ,
8 7 6 5 4
off the computer
B
c.
A
(page 2 -
, , & (the reverse order as indicated on
2
3 1
)
(Figure 9c .
B
Removing and Installing a Processor 2 - 13
Disassembly
Figure 9
Processor Removal
8).
a. Locate the CPU heat
sink.
b. Remove the screws.
c. Carefully remove the
heat sink unit.

B. Heat Sink
• 8 Screws