Table of Contents
Advertisement
3
Setup & Configuration
Figure 3-14. Utility Program - Choose Options Screen
From this screen you will select the main operating settings for your end device.
(Note: Each end device must have a different address number for proper
operation). After making your selections click the "Next >" button to proceed
and program your settings into your unit.
(1) Backlight Options
Intensity
Here you can set how bright you want the backlighting to be when on. Keep in
mind that when used under battery power the led brightness has a direct effect
on the life of the battery. Keep to the lowest setting possible for your ambient
light conditions to conserve of battery power.
External Power
Here you can set the amount of time you want the backlighting to stay on when
activated and the unit is running on external power. Note that you can only set
the backlighting to be "Always On" when the unit is powered by an external
power supply. When set to 60 or 300 seconds the backlight will come on and
then turn off after the allotted time has expired.
Battery Power
Here you can set the amount of time you want the backlighting to stay on
when activated and the unit is running on battery power only. Note that you
can not set the backlighting to be "Always On" when the unit is powered by
battery power. When set to 10 or 30 seconds the backlight will come on and then
turn off after the allotted time has expired. If backlighting is not required it is
recommended that you select "Always Off" to preserve battery life.
3-8
Advertisement
Table of Contents
