Volvo V60 RECHARGE 2021 Owner's Manual page 466

STARTING AND DRIVING
||
1. Point the remote control at the
®
HomeLink button to be programmed and
hold it about 2-8 cm (1-3 inches) from the
button. Do not obstruct the HomeLink
indicator light.
Note: Some remote controls are more
effective at programming HomeLink
a distance of about 15-20 cm (6-12
inches). Keep this in mind if you experi-
ence any programming difficulties.
2. Press and hold both the remote control
button and the HomeLink
programmed.
16 The name and color of the button varies depending on the manufacturer.
464
3. Do not release the buttons until the indica-
tor light has stopped flashing slowly
(about once a second) and either flashes
® quickly (about 10 times a second) or
glows steadily.
> If the indicator light glows steadily:
Indication that programming is com-
®
from
plete. Press the programmed button
twice to activate.
If the indicator light flashes quickly:
The device being programmed with
HomeLink
®
button to be
tion that requires an extra step. Try
pressing the programmed button twice
to see whether the programming
works. Otherwise, continue with the
following steps.
®
may have a security func-
4. Locate the "training" button
receiver for the e.g. garage door opener. It
is usually located near the antenna bracket
on the receiver.
5. Press and release the "training" button
once. Programming must be completed
within 30 seconds after pressing the but-
ton.
6. Press and release the HomeLink
to be programmed. Repeat the press/
hold/release sequence a second time. For
some receivers, the sequence may need to
be repeated a third time.
> Programming is now completed and
the garage door, gate, etc. should now
be activated when the programmed
button is pressed.
If you experience any difficulties programming,
®
please contact HomeLink at: homelink.com,
or call 1–800–355–3515.
16
on the
®
button