STARTING AND DRIVING
||
Mode
Functions
I
The panoramic roof, power
•
windows, 12-volt electrical
socket in the passenger com-
partment, Bluetooth, naviga-
tion, phone, blower and wind-
shield wipers can be used.
The power seats can be
•
adjusted.
The 12-volt electrical socket* in
•
the cargo compartment can be
used.
Electrical current will be taken
from the battery in this ignition
mode.
II
The headlights illuminate.
•
Warning/indicator lights illumi-
•
nate for 5 seconds.
A number of other systems are
•
activated. However, seat and
rear window heating can only
be activated when the engine
is running.
This ignition mode uses a lot of
current from the battery and
should be avoided whenever
possible!
A
Also activated when the door is opened.
416
Related information
Starting the vehicle (p. 412)
•
Adjusting the steering wheel (p. 195)
•
Jump starting using another battery
•
(p. 455)
Selecting ignition mode (p. 416)
•
Selecting ignition mode
The vehicle's ignition can be put in various
modes (levels) to make different functions
available.
Selecting an ignition mode
Start knob in the tunnel console.
Ignition mode 0 – Unlock the vehicle and
•
keep the remote key in the passenger
compartment.
NOTE
To set level I or II without engine start –
do not depress the brake pedal (or clutch
pedal for vehicles with manual transmis-
sion) when selecting this ignition mode.
Ignition mode I – Turn the start knob
•
clockwise and release it. The control will
* Option/accessory.