Symbol
Meaning
Steady glow for 2 seconds after
the engine is started: Automatic
function check.
Steady glow for more than 2
A
seconds: Fault in the ABS sys-
tem. The vehicle's regular brake
system is still working, but with-
out the ABS function.
B
If the message
Brake pedal
Characteristics changed Serv-
ice required
is displayed, the
"Brake-by-wire" system is not
functioning properly. The brake
pedal must be depressed with
greater pressure, past the normal
braking position, in order to
brake the vehicle.
In Canada.
A
In the US.
B
3
Brake Assist System
WARNING
If the warning symbols for both brake fault
and ABS fault are lit simultaneously, there
may be a fault in the brake system.
If the brake fluid reservoir level is nor-
•
mal when this occurs, drive carefully to
the nearest workshop to have the
brake system checked - an authorized
Volvo workshop is recommended.
If the brake fluid has fallen below the
•
MIN level in the brake fluid reservoir,
the vehicle should not be driven until
the brake fluid has been filled. The rea-
son for the brake fluid loss must be
checked.
Related information
Brake Assist System (p. 419)
•
Auto-hold brakes (p. 424)
•
Hill Start Assist (p. 426)
•
Braking on wet roads (p. 420)
•
Braking on salted roads (p. 420)
•
Maintenance of the brake system (p. 420)
•
Brake lights (p. 159)
•
STARTING AND DRIVING
Brake Assist System
The brake enhancing system, (BAS
increase braking force and can thereby
reduce braking distance.
The system monitors the driver's braking hab-
its and increases braking force when neces-
sary. Braking force can be increased up to the
point at which the ABS intervenes.
Related information
Brakes (p. 417)
•
3
), helps
419