Phone Setup; Call Screening; Phone Identity - Siemens M65 Operating Manual

44 Setup
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Ç
Other possibilities for divert:
Not reachable, No
fax, Receiving data

Call screening

Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key answ.
Incoming calls can be accepted by
pressing any key
(except for
B
Minute beep
During the call, you (and only you!)
will hear a beep after each minute as
a reminder of the time elapsed.
reply, Busy, Receiving
).
b

Phone setup

¢
C
¢
Key tones
Set the type of acoustic key
acknowledgement.
Info tones
Set service and alarm tones.
Automatic switch off
The phone switches off each day at
the set time.

Phone identity

The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
Alternatively enter in standby mode:
*
# 0 6 #
§Info§
Device check
A self-test and individual tests are
offered at the end of the last page of
information. If you select Selftest, all
individual test are carried out.
Software version
Display in standby mode:
*
# 0 6 #, then press §Info§.
¢
Phone setup
T
Select function.
Display further informa-
tion about the appliance.