Call Options - Siemens M65 Operating Manual

Call options

Functions which are only
§Options§
available during the call
are offered.
Swapping between
two calls
Establish a second connection
Open menu.
§Options§
Hold current call, then
Hold
dial the new phone
number.
Open menu.
§Options§
Swap between calls.
Swap
Incoming calls during a call
You will hear a "call waiting tone"
and you can now:
• Accept the waiting call in addition to
the first
Accept the call and put
§Swap§
the current call on hold.
• Reject the waiting call
Reject the call, or via
§Reject§
§Divert§
box.
• Accept the waiting call and end the
current call
End call.
B
Accept new call.
C
divert it to the mail-
End call(s)
Press the End key.
B
Resume held call.
§Yes§
End all calls.
§No§
Conference
You call up to 5 conference partici-
pants one after the other. Once you
have established a connection:
Open menu and select
§Options§
Hold. The current call is
put on hold.
Now dial a new number.
When the new connec-
J
tion is established ...
... open menu and select
§Options§
Conference. Repeat until
all participants are con-
nected.
End
All calls in the multiparty
conversation are ended
B
when the End key is
pressed.
Tone sequences (DTMF)
Enter tone sequences (digits) for
remote inquiries to an answering
machine.
Open menu and select
§Options§
Send
Calling
DTMF.
19