Direct Call - Siemens M65 Operating Manual

Security
¢ ¢
Security
C
T
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Additional information
Block/unblock in standby mode. In each
case:
Hold down
#

Direct call

Only one phone number can be
dialled. The required phone code
(4 to 8-digits) is set by you and
entered at the first security setting.
To switch off, hold down,
#
then enter the phone
code.
.
Only
‚
Restrict calls to SIM-protected num-
bers in the Phonebook.
This SIM only
Your phone is prevented from being
used with a different SIM card.
Codes
For description see p. 14:
PIN control, Change
Chg.phonecode
Barrings
Network barring restricts the use of
your SIM card.
All outgoing
All outgoing calls except emergency
numbers are barred.
Outgoing intl. (outgoing international)
Only national calls can be made.
Out.int.x.home (outgoing international
without home country)
No international calls, only calls to
the home country.
All incoming
The phone is barred for all incoming
calls.
Setup
b
b
PIN, Change PIN2,
b
47