Phone Setup - Siemens MC60 User Manual

of MC60 Maguro, kurz, am, A31008-H5760-A40-1-4A19 (08.08.2003, 12:31)
right page (43)
Keys
¢
§Menu§
function.
Any to answer
Incoming calls can be accepted by
pressing any key
(except for
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
Key tones
You can set the type of acoustic key
tone:
Click or Tone
¢ ¢
Select
Keys
).
Hold down
.
or Still

Phone setup

¢ ¢
§Menu§ Phone setup
¢
Select function.
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
also p. 19).
Hide ID
If activated, your phone number will
not appear on the other party's
display (depending on tyour service
providers).
Divert
You can specify when calls should be
diverted to your mailbox or other
numbers.
Set up call divert (example):
The most common condition for call
divert is, for example:
Unanswered
Select Unanswered.
(Includes the conditions
Not reachable,
Busy, see below)
Press and select
§Select§
Setup 43
b
b
b
No reply,
.
Set