Table of Contents
Advertisement
3. Press the
icon (B12). The beans (B7) on the touch
screen flash;
OK icon (B15) to reset the default values
4. Press the
(or
ESC (B14) to exit without making the change).
The lights go off.
The settings and quantities of the beverages have been reset to
the default values.
14. RINSING
Use this function to deliver hot water from the coffee spouts
(A19) to clean and heat the appliance's internal circuit.
Place a container with a minimum capacity of 100ml under the
coffee and hot water spouts.
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1) To activate the function, press
2) After a few seconds, hot water is delivered from the cof-
fee spouts, cleaning and heating the appliance's internal
circuit.
3) To interrupt the function manually, press
Please note!
•
If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
•
After cleaning, it is normal for the coffee grounds container
(A11) to contain water.
15. MAKING COFFEE
15.1 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by calibrating
the coffee grinding using the adjusting dial (A5) (fig. 8).
Please note:
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do not
turn more than one click at a time other-
wise the coffee could be delivered a drop
at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
15.2 Tips for a hotter coffee
For hotter coffee, you should:
•
•
•
15.3 Making coffee using coffee beans
Do not use green, caramelised or candied coffee beans as they
could stick to the coffee mill and make it unusable.
1. Fill the container (A3) (fig. 9) with coffee beans;
OK (B15);
2. Place under the coffee spouts (A19):
3. Lower the spouts as near as possible to the cup. This makes
OK again.
4. Then select your required coffee:
12
perform a rinse cycle by pressing
warm the cups with hot water using the hot water function
(see section "17. Delivering hot water");
increase the coffee temperature (see section "8. Setting
water hardness").
Important!
- 1 cup, if you want to make 1 coffee (fig. 10);
- 2 cups if you want 2 coffees.
a creamier coffee (fig. 11);
Recipe
Quantity
≃ 40 ml
Espresso
(B10)
≃ 120 ml
Espresso
Lungo
(B11)
≃ 180 ml
Coffee
(B12)
≃ 160 ml
Long (B13)
≃ 40 ml x
2x (B9)
+
2 cups
Espresso
(B10)
OK (B15);
Program-
Default
mable
aroma
quantity
from ≃30 to
≃ 80ml
from ≃80 to
≃180c
from ≃100 a
≃240cc
from ≃115 to
≃250cc
--
Advertisement
Table of Contents
Troubleshooting
