Operations; Listening To A Program Source - Sherwood RX-4105 Operating Instructions Manual

Operations

LISTENING TO A PROGRAM SOURCE

Turn the power on.
1
Each time this button is pressed, this unit is turned
on to enter the operating mode or off to enter the
standby mode.
In the standby mode, the STANDBY indicator lights
up. This means that the receiver is not
disconnected from the AC mains and a small
amount of current is retained to support the
memorized contents and operation readiness.
In the standby mode, if an INPUT SELECTOR
button is pressed, the unit is turned on
automatically and the desired input is selected.
Select the desired input source.
3
Each time the FM/AM button on the front panel
or the TUNER button on the remote control is
pressed, the band is changed to AM or FM.
To mute the sound.
6
"MUTE" lights up and flickers.
To resume the previous sound level, press this
button again.
Switch the desired speakers on.
2
Then the corresponding speaker
indication("SPK A(or/and) B") is displayed and
the sound can be heard from the speakers
connected to the selected speaker terminals.
When using the headphones for private
listening, press the corresponding SPEAKER
button to switch off both A and B speakers.
Operate the selected component for
4
playback.
Adjust the volume to a comfortable
5
listening level.
To listen with the headphones.
7
Be sure to switch off both A and B speakers.
10