Sherwood RD-6105 User Manual page 11

Adjusting the tone(bass and treble)
Enter the tone mode.
• Each time this button is pressed, the corresponding
tone mode is selected and shown for 3 seconds as
follows:
BASS TRBL(treble)
Note: When the TONE DIRECT indicator is
lighting up, the tone mode cannot be entered.
To listen to a program source without the
tone effect.
At the desired tone mode, adjust the tone
as desired.
• If the tone display disappears, start from the step 10
again.
Notes:
• Extreme settings at high volume may damage your
speakers.
• When the digital signals from DTS or Dolby Digital
program sources are input in available surround
mode, the tone cannot be adjusted and the tone
direct function is automatically switched to ON.
• The TONE DIRECT indicator lights up and the
sound that bypasses the tone circuitry will be heard.
• To cancel the tone direct function, press this button
again.
1 2