Table of Contents
Advertisement
Changing spin speed/selecting rinse hold
Press the RPM key repeatedly,
until the desired spin speed or
RINSE HOLD is displayed.
3
With spin speed "0" the last rinse
water is drained off at the end of
the cycle, but the washing is not
spun.
• With
RINSE HOLD the
washing is left to soak in the last rinse water. There is no final spin after the
intermediate spin(s). Intermediate spins are programme-dependent and
cannot be altered.
Setting options
Options can be added to a wash cycle that has already been selected.
Press the OPTION key. The display shows the symbols for the options.
PREWASH
Pre-washes at about 30 °C before the main wash cycle, which fol-
lows automatically.
SENSITIVE
Enhanced rinse action through an additional rinse cycle together
with decreased drum movement (improved fabric care). This is ideal
when frequent washes are necessary, for example, in cases of highly
sensitive skin. An additional rinse cycle can also be permanently set
(see section "Setup").
STAIN
For heavily soiled and stained washing. In-wash stain treatment
products are washed in at the optimum time as the program
progresses.
NIGHT CYCLE
The washing is left to soak in the final rinse water. There is no final
spin and no intermediate spin. Because of this the program runs
very quietly. NIGHT CYCLE is therefore particularly suitable if you
want to wash at night.
LINEN/EASY CARE
Cycle end at
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. C°
U/MIN.
TEMP. C°
T/MIN.
OPTIONS
12.45
14.37
OPTION
OK
OK
TEMPS
ZEIT
15
Advertisement
Table of Contents
