Related Manuals for Electrolux EWF 169547 W
Summary of Contents for Electrolux EWF 169547 W
- Page 1 ..................... EWF 169547 W EN WASHING MACHINE USER MANUAL...
-
Page 2: Table Of Contents
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Care and cleaning Product description What to do if… Control panel Technical data First use Consumption values Personalisation Installation Daily use Electrical connection Helpful hints and tips... - Page 3 3 INSTALLATION ing fluids are used, care should be taken to ensure that the fluid is removed from • This appliance is heavy. Care should be the garment before placing in the ma- taken when moving it. chine. • When unpacking the appliance, check •...
-
Page 4: Product Description
4 electrolux PRODUCT DESCRIPTION Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows to- tal use of detergent and reduces water consumption so saving energy. -
Page 5: Control Panel
5 Flap for powder or liquid deter- gent (see "Flap for powder or liquid de- tergent" in the chapter "Daily use" for more details). CONTROL PANEL Below is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. -
Page 6: Time Manager
6 electrolux TIME MANAGER These buttons allows you to modify the programme duration automatically pro- posed by the appliance. DISPLAY 2.12 2.11 2.10 2.1 2.2 2.3 2.6 2.7 2.8 The display shows the following informa- tion: 2.1: Temperature value 2.2:... -
Page 7: First Use
7 2.9: • Duration of the set programme: after selecting a programme, the duration is dis- played in hours and minutes (for example ). The duration is calculated automati- cally on the basis of the maximum load for each type of fabric. After the programme has started, the time remaining is updated every minute. -
Page 8: Daily Use
8 electrolux CHILD SAFETY LOCK 1. Before pressing button 8: it will be im- possible to start the machine. This device permits you to leave the appli- 2. After pressing button 8: it will be im- ance unattended and not to worry that chil-... - Page 9 9 FLAP FOR POWDER OR LIQUID DETERGENT UP- The flap position if using POWDER detergent DOWN - The flap position if using LIQ- The flap is down and you wish to use UID detergent during main wash powder detergent: •...
- Page 10 10 electrolux • Close the dispenser drawer. • Remove the remaining powder form the flap. Warning! Do not use the flap in • There is remaining powder detergent "DOWN" position with: in the main wash compartment at • Gelatinous detergent or thick deter- the end of a washing programme.
- Page 11 11 Caution! If you turn the programme The selected delay time value (up to 20 selector dial to another programme hours) will appear on the display a few sec- when the machine is working, the red onds, then the duration of the programme pilot light of button 8 will blink 3 times will appear again.
- Page 12 12 electrolux SELECT THE TIME MANAGER OPTION Press the button again to restart the pro- BY PRESSING BUTTONS 9 gramme. By pressing these buttons repeatedly, the CANCELLING A PROGRAMME duration of the washing cycle can be in- Turn the selector dial to to cancel a pro- creased or decreased.
-
Page 13: Helpful Hints And Tips
13 you do not intend to carry out another Turn the programme selector dial to wash, close the water tap. Leave the door switch the machine off. open to prevent the formation of mildew Remove the laundry from the drum and and unpleasant smells. -
Page 14: Washing Programmes
14 electrolux • powder detergents for delicate fabrics gree of soiling and hardness of the water (60°C max) and woollens used. • liquid detergents, preferably for low tem- Follow the product manufacturers’ instruc- perature wash programmes (60°C max) tions on quantities to use. - Page 15 15 Programme - Maximum and Minimum Tempera- Detergent Com- ture - Cycle Description - Maximum Spin Speed - Options partment Maximum Fabrics Load - Type of Laundry Lana / A mano SPIN REDUCTION 40° - Cold NIGHT CYCLE Main wash - Rinses...
- Page 16 16 electrolux Programme - Maximum and Minimum Tempera- Detergent Com- ture - Cycle Description - Maximum Spin Speed - Options partment Maximum Fabrics Load - Type of Laundry SPIN REDUCTION NIGHT CYCLE 90° - 40° RINSE HOLD Main wash - Rinses...
-
Page 17: Care And Cleaning
17 Programme - Maximum and Minimum Tempera- Detergent Com- ture - Cycle Description - Maximum Spin Speed - Options partment Maximum Fabrics Load - Type of Laundry O = OFF For cancelling the programme which is running or to switch the machine off . - Page 18 18 electrolux To aid cleaning, the top part of the additive compartment should be removed. Clean all parts with water. DRAIN PUMP Regularly examine the drain pump and make sure that it is clean. Clean the pump regularly and/or if: •...
- Page 19 19 3. Press the two levers and pull forward 8. Make sure that the impeller of the the drainage duct to let the water flow pump can turn. If this does not occur, out. contact the service centre. 9. Clean the filter under the water tap and 4.
-
Page 20: What To Do If
20 electrolux 3. Clean the filter in the hose using a hard 7. when the container is full of water, put bristle brush. the drainage duct back again and emp- ty the container; repeat this operation until water stops flowing out;... - Page 21 21 • gramme. If after all checks, the problem : problem with the water supply. persists, contact your local Service Centre. • : problem with the water draining. • : door open. Once the problem has been eliminated, press the button 8 to restart the pro-...
- Page 22 22 electrolux Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fit- tings.
-
Page 23: Technical Data
23 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, se- Mod..rial number and purchase date of your ma- Prod. No.. -
Page 24: Installation
24 electrolux INSTALLATION UNPACKING 4. Slide out the relevant plastic spacers. All transit bolts and packing must be re- moved before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. - Page 25 25 with a spanner. Accurate levelling prevents 2. The other end of the inlet hose which vibration, noise and displacement of the connects to the machine can be turned machine during operation. as showed in the picture. Do not place the inlet hose downwards.
-
Page 26: Electrical Connection
26 electrolux • In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. • Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. - Page 27 27 This means that they can be recycled by • The machine works more economically if disposing of them properly in appropriate it is fully loaded. collection containers. • With adequate pre-treatment, stains and limited soiling can be removed; the laun-...
- Page 28 132924630-A-142012...