Switching on the appliance/selecting a programme
Set the programme and temperature
using the programme knob.
By selecting a programme, you switch
the appliance on at the same time.
– The programme progress display indi-
cates the programme steps that the
selected programme will perform.
– In the multi-display the
estimated length of the programme (in
minutes) appears.
Changing the spin speed/selecting rinse hold
The washing machine suggests the max-
imum permitted speed that is suitable for
the selected programme. You can reduce
this speed:
Press the SPIN/RINSE HOLD button re-
peatedly until the desired display lights
up.
The speed for the final spin can still be al-
tered during the programme. To do this:
1.Press the START/PAUSE button.
2.Change the speed.
3.Press the START/PAUSE button again.
RINSE HOLD
With RINSE HOLD the washing is left to soak in the final rinse water. There is
no final spin after the intermediate spin(s). Intermediate spins are pro-
gramme-dependent and cannot be altered.
Selecting the programme options
If desired, press the programme option
button(s). The corresponding light lights
up.
If "Err" flashes in the multi-display, the
programme option selected cannot be
combined with the wash programme set.
14