Table of Contents
Advertisement
Water drainage
The maximum permitted difference between the height of the surface on
which the appliance is installed and the water outlet is 1 metre.
Only original hoses may be used to extend hoses. (A maximum of 3 m laid
on the floor and then 80 cm vertically). The Customer Care Department
stocks outlet hoses of different lengths.
Draining water into a sink outlet
Secure the outlet/sink outlet joint with a
hose band clip (available from your deal-
er).
Draining water into a wash basin/bath
1
Important!
– Small basins are not suitable. Water
may overflow.
– The end of the drain hose must not be
in the water that has been pumped out.
Otherwise water could be sucked back
into the appliance.
– When draining into a wash basin or a
bath, secure the drain hose with the
supplied elbow to stop it slipping. Oth-
erwise the water running out can force
the hose out of the basin.
– When pumping the water out, check
that the water is running away fast
enough.
Pumping heights over 1 m
The washing machine's drain pump is able to pump water to a height of
1meter, calculated from the surface on which the appliance is installed.
Warning! If pumping height is over 1 metre, malfunctions and damage to
the appliance may arise.
For pumping heights over 1metre a conversion kit can be obtained. Please
contact the Customer Care Department.
39
Advertisement
Table of Contents
