Connecting The Monitor To A Computer - Sharp IT-23M1U Operation Manual

Digital connection
Connect the separately-sold digital signal cable
(model name: NL-C04J) to the digital RGB output
terminal of the computer.
See page E8 for information on removing/
replacing the terminal cover.
- The monitor has an input terminal for connecting
to a computer with a DVI-compatible output
terminal (DVI-D 24 pin or DVI-I 29 pin).
(Depending on the type of computer to be
connected, the display may not work correctly.)
PC digital RGB input terminal
Digital signal cable
(separately-sold)
- Paying attention to the connector direction, firmly
insert the signal cable straight into the
connector, and then tighten the screws at both
ends.
IT-23M1U_gb_01.P65

Connecting the monitor to a computer

Digital RGB
output terminal
15
Connecting the audio cable
Connect the supplied PC audio cable to the audio
output terminal of the computer.
PC audio input terminal
E15
2004/08/20, 10:41
Audio
output
terminal
PC audio cable
(supplied)