Connecting The Monitor To A Power Source - Sharp IT-23M1U Operation Manual

Connecting the monitor to a power source

CAUTION!
- When connecting, ensure that the monitor is switched off.
- Always use the AC adapter that came with the monitor.
- Be careful not to over bend the cable or add extension cords as this could lead to a malfunction.
See page E8 for information on removing/replacing the terminal cover.
1. Connect the AC adapter to the power input terminal.
Power input terminal
AC adapter (supplied)
2. Plug the power cord into the AC adapter and then place the power plug into an AC outlet.
Power cord (supplied)
AC outlet
AC adapter (supplied)
E20
IT-23M1U_gb_01.P65 20 2004/08/20, 10:41