Sharp LD-26SH3U Operation Manual page 65

Problem
"Temperature" is displayed
on the screen.
POWER LED blinks red.
Troubleshooting
What to Check
If the temperature inside the TV rises, this message is displayed
on the screen and then the TV switches to standby mode. Check
the following points before turning the power on.
- Is the location where the TV is installed easily susceptible to
temperature rises?
- Is there anything blocking the airflow in the ventilation openings?
- Has dust accumulated in the ventilation openings?
(If dust has accumulated, remove it. If dust has accumulated
inside of the TV, consult the shop where you purchased the TV
or your nearest Sharp authorized Service Center.)
There is a problem with the fan of the ventilation openings. After
turning off the power, consult the shop where you purchased the
TV or your nearest Sharp authorized Service Center for the repair.
E64